Every estimate visit you don’t need to make is an hour back and a truck that stays on a paying job. Quoting from photos works for a lot of plumbing and roofing work, but only if you ask for the right photos and know what a photo can’t tell you. This checklist covers both.
Why quote from photos at all
Homeowners shop several contractors at once. The one who sends a clear number first, often the same day, usually wins the job. A site visit for a $300 repair costs you drive time, labor and a slot on the schedule. Photo quoting lets you filter out the small jobs and tire-kickers before anyone leaves the shop.
Step 1: Ask for the right photos
Send the customer a short, specific request by text. Vague asks (“send me a pic”) get you blurry close-ups with no context. Ask for:
- One wide shot that shows the whole area
- One close-up of the problem
- One photo of any labels or model plates
- A short video (10 to 15 seconds) if there is a leak, noise or active drip
Plumbing checklist
- Fixture or appliance: brand, model and age from the data plate (water heaters, toilets, faucets).
- Shutoff valves: can you see them, and do they look working or corroded?
- Pipe material: copper, PEX, galvanized, PVC or cast iron changes parts and labor.
- Access: crawlspace, finished wall, tight closet or open basement.
- Water damage: staining, soft drywall or mold means the scope may grow.
- Venting and clearances (water heaters): flue, gas line and code clearances.
- Location: which floor, and how far from the street or main.
Roofing checklist
- Roof type and material: asphalt shingle, metal, tile, flat membrane.
- Pitch: a photo from the ground at an angle, or a note on whether the customer feels safe walking it.
- Size: an address lets you pull aerial measurements instead of climbing up.
- Problem area: missing shingles, flashing, soft spots, ponding, granule loss.
- Penetrations: vents, skylights, chimneys and satellite mounts each add flashing work.
- Layers: a photo of an exposed edge shows whether there is an old layer to tear off.
- Attic or ceiling photos: staining inside tells you how long water has been getting in.
Step 2: Decide quote, range or visit
Not every photo set deserves a firm price. Use three outcomes:
- Firm quote: standard swap-outs and repairs where photos show everything you need.
- Ranged quote with conditions: “$1,800 to $2,400, final price confirmed on arrival if we find rotted decking.”
- Site visit required: hidden damage, full replacements, anything involving structure or code questions.
Put the conditions in writing. A range with stated assumptions protects your margin without scaring the customer off.
Step 3: Send it fast and make it clear
A quote loses value every hour it sits. Include a plain scope, the price or range, what is and isn’t covered, and one button or link to approve. Then follow up. Most unsigned quotes aren’t rejections, they’re forgotten.
Where Crewspry fits
Writing these quotes by hand is the part that eats evenings. Crewspry’s quoting agent reads the customer’s photos, drafts a scope and price from your own pricing, and sends it to you for one-click approval before it goes out. It then chases unsigned quotes for you. It works alongside Jobber, QuickBooks and Google Calendar, so nothing in your current setup has to change. If you’re an electrician, see how electricians quote jobs from photos for the same approach.
Want to see it on your own jobs? Start with Crewspry.